Leaded Resistors    Carbon Film Resistors Precision Metal Film Fixed Resistors Metal Oxide Film Resistors Fusible Resistors Wire-Wound Fixed Resistors Terminal Type MO Resistors Metal Glazed Film Fixed Resistors Anti-Surge Fixed Resistors 　 　 　 　 　 　 Cement Resistors Non-inductive CMOS Chip Resistors Cement Fixed Resistors Aluminum House WireWound Resistors 　   　 　 　 　 　 　 Mini Ohm Resistors Cumn & Cuni 　 　 MELF Resistors MELF Fusible MELF Metal Film MELF Carbon Film MELF Anti-Surge MELF Metal Oxide Film MELF Metal Glaze MELF Wire Wound 　 　 SMD Resistors Thin Film Chip Fuse Thick Film Chip Resistors Thin Film Chip Resistors Metal Thin Film Chip Resistors Anti-Sulfuration Chip Resistors Thick Film High Voltage Chip Resistors Thick Film Low Ohmic Chip Resistors Metal Foil sensing Chip Resistors Metal Foil High Power Current Sensing Resistors RLP Series Thick Film Chip Resistor Arrays(Network) Convex Type

Reliable Experiment 　 Our company has a series of resistors of reliable experiment equipment. Also, we have a reliable experiment plan in a whole set for our products and materials to ensure the product’s stability 　 •Experiment Characteristics Short time overload   / Pulse  / Humidity load life  / Load life  / Solderable  / Soldering Heat  / Temperature characteristics   • / Dielectric Withstanding Voltage  / PTC •                                               　 　 •Describe the Materials (Ceramic Core)Taiwan (Alumina over 73% ) Japan / Taiwan (Alumina between 80%~85%) German / Taiwan (Alumina between 80%~85%) (Cap)Japan (Iron Copper-Plating & Tin-Plating ) (Coating/Color Code)Epoxy Resin/Silicon Resin • • • (Lead Wire)Solder plated copper wire 　 • •(Cutting) 　 Lines effective length required to achieve more than 85 percent of the ceramic rods. Cutting lines must be smooth, not broken edges off cutting, hunting, and other adverse occur. 　 •(Soldering) 　 The works shall be strictly control the welding point of tension, if the adverse cause shedding phenomenon occurs when the AI production. Our Standard on: 1/6W   3 KG above (1/6W Over 3 KG)                           1/4W   5 KG above (1/4W Over 5 KG)                           ½ W~5W  6KG above (1/2W~5W Over 6 KG) • 　 • (Coating) This engineering station to control the resistance of the paint thickness and color-coded color correctness. • •(Forming / Packaging) 　 (According to the customer’s standard to forming the product.) • Horizontal Type (the hit KIN, hit flat) Vertical (single-KIN, double-KIN) Horizontal, Vertical Radial Tape • Packaging return defective products to be elected and confirm the amount and part number. 　 　 (Wire Wound 、Cement Type Resistors) 　 (According to the customer’s specification to finish the product.) Cement resistor patterns: MSQ, SQH, SQM, SQP, SQZ, FASQ…and so on.) (Process：Marking, Grouting, Oven, and Test resistance value.) • 　 •

                                            | Home  | About TAI | Associated  | Products | Certifications  | Quality  | Customers  | Contact us

                                                                                                                      COPYRIGHT @ 2012  TaiOhm Design